W11025156 Genuine OEM Whirlpool Dryer Heating Element
The W11025156 is a genuine Whirlpool OEM heating element for Whirlpool, Kenmore, and Maytag electric dryers. This element is the source of virtually all the heat in the dryer: it converts electrical energy into heat, which the blower then circulates through the drum to dry your clothes. Even heat distribution from a properly functioning element is what keeps drying times consistent and prevents the dryer from having to run longer cycles to compensate.
Over years of use, the coil typically fails with a visible break somewhere along its length — a section simply burns through and the circuit opens, cutting off heat entirely. Symptoms of a failing element include clothes taking too long to dry, clothes coming out cold, or the dryer not heating at all. This part is also essential for preventing overheating, since a properly functioning element operates within its designed parameters rather than drawing excess current trying to compensate for a partial failure. It directly replaces W10608823.
Quick Answer
The W11025156 Genuine OEM Whirlpool Dryer Heating Element fixes Whirlpool, Kenmore, and Maytag electric dryers with no heat, insufficient heat, or drying times that have gotten noticeably longer. Replaces W10608823. Before replacing, clean out or inspect your exhaust venting — restricted airflow is a common cause of premature heating element failure, and a fresh element installed into a clogged system is likely to fail again.
Common Problems This Part Fixes
- Dryer runs a full cycle but produces no heat at all
- Dryer produces some heat, but not enough to dry clothes properly
- Drying times that have gotten noticeably longer than they used to
- Clothes coming out cold or barely warm at the end of a cycle
- Visible break or burned-through section in the heating coil
- Dryer not drying laundry despite completing a normal cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
W11025156, W10608823, 4461512, W10608823, AP6037386, AWP42261, EAP11770230, PD00034419, PS11770230.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Kenmore and Maytag dryers built on the same platform, including model numbers such as:
- MEDB855DC2, MEDB955FC1, MEDB955FW1 (Maytag)
- YWED8000DW1, YWED8500DW1, WED9500EC0, WED9500EW0, WED8700EC2
- Kenmore 11061632610, 11061632611, 11061632612, 11061633610, 11061633611
- Kenmore 11068132411, 11068132412, 11068132413, 11068133411, 11068133412, 11068133413
- Kenmore 11069132411, 11069132412, 11069132413, 11069133411, 11069133412, 11069133413
- Kenmore 110C61633610, 110C68132413
Note: Always verify your full model number before ordering, since Whirlpool uses several different heating elements across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
- Genuine Whirlpool OEM part — factory-specified coil design and electrical rating
- Converts electrical energy into heat, circulated through the drum by the blower
- Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
- Ensures even heat distribution for consistent drying performance
- Direct drop-in replacement — no modification required
- Replaces W10608823
- Compatible with Whirlpool, Kenmore, and Maytag electric dryers
- Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
| Part Number | W11025156 |
| Part Type | Dryer Heating Element |
| Condition | Genuine OEM |
| Brand | Whirlpool |
| Function | Generates heat to dry clothes, circulated through the drum |
| Repair Difficulty | Medium — basic electrical skills and dryer panel disassembly required |
| Quantity | 1 heating element |
| Compatible Brands | Whirlpool, Kenmore, Maytag |
Installation Notes
Frequently Asked Questions
My dryer runs a full cycle but the clothes are still wet. Is this the heating element?
It's a strong possibility, especially if you've noticed drying times gradually getting longer before the dryer stopped heating altogether. One customer described exactly this symptom — "dryer not drying laundry" — and resolved it with this exact replacement element.
Do I need any special tools for this repair?
Just basic hand tools. A 1/4" ratchet with a 5/16" socket handles the back panel screws on most models. Using a socket adapter on a screw gun can speed up the process, since there are several screws to remove and reinstall on the back panel alone.
Why does the listing recommend cleaning the vent during this repair?
Restricted airflow from a lint-clogged exhaust duct is one of the most common root causes of heating element failure — when air can't move through the system properly, heat builds up around the element well beyond its designed operating range, accelerating wear and often leading directly to a burned-through coil. Since you'll already have the dryer open for this repair, cleaning the full duct run from the lint trap to the outside vent hood is a good use of the same trip and helps the new element last.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original coil design and electrical rating of the heating element originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
