XPARTCO WH13X10029 (OE) Washer Water Valve
OE-style 2-inlet/3-outlet water inlet valve assembly for select GE front-load washing machines.
Product Overview
The XPARTCO WH13X10029 Washer Water Inlet Valve controls hot and cold water entering compatible front-load washing machines. The washer control energizes the appropriate solenoid to direct water through one of the three outlets and into the dispenser system.
This is a quality XPARTCO aftermarket OE-style replacement part. It is designed to replace WH13X10029 in compatible GE-built washers and is not a Genuine GE OEM part.
Quick Answer
WH13X10029 is a 2-inlet/3-outlet washer water valve assembly. It has separate hot- and cold-water hose connections and three controlled outlet paths. Verify the complete washer model, connector layout, mounting points, and hose arrangement before ordering.
Common Problems This Part May Fix
- Washer will not fill with water
- Slow hot- or cold-water filling
- Washer continues filling after it should stop
- Leaking near the inlet valve assembly
- No hot water or no cold water
- Incorrect water flow through the dispenser
- One or more valve solenoids fail to open
Replaces Part Number
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not affiliated with GE Appliances.
Compatibility
Designed for select GE front-load washers that specify WH13X10029. Verified model examples associated with this valve include:
Important: This is only a partial model list. Similar-looking water valves may have different outlet counts, electrical connectors, flow paths, or mounting brackets. Confirm the complete model number and original valve number before purchase.
Key Features
- Quality XPARTCO aftermarket OE-style replacement
- Two threaded water inlets
- Three controlled water outlets
- Controls hot and cold water entering the washer
- Directs water through the dispenser system
- Designed for select GE front-load washers
Product Specifications
| XPARTCO Part Number | WH13X10029 |
| Brand | XPARTCO |
| Part Type | Washer Water Inlet Valve Assembly |
| Condition | New |
| Part Quality | Aftermarket OE-Style Replacement |
| Inlet Configuration | 2 Inlets |
| Outlet Configuration | 3 Outlets |
| Application | Front-Load Washing Machine |
| Included | One Water Inlet Valve Assembly |
Troubleshooting Guide
- Unplug the washer and close both household water-supply valves.
- Confirm that the inlet hoses are not kinked and the household water pressure is adequate.
- Inspect the valve inlet screens for sediment or blockage.
- Check for leaks around the valve body, hose threads, outlet hoses, and clamps.
- Test each solenoid for continuity and verify that the washer sends voltage during the correct fill command.
- Inspect the wiring harness, pressure system, dispenser hoses, and main control if the valve is not energized.
- Replace the valve when it leaks, remains open, is electrically open, or fails to pass water when energized.
Diagnostic tip: A filling problem can also be caused by closed supply valves, clogged hoses, low water pressure, a failed pressure sensor, damaged wiring, or a control-board fault.
When Should You Replace This Part?
- The washer does not fill or fills too slowly
- The valve leaks or will not close fully
- One or more solenoids test open
- The valve is restricted after the inlet screens are cleaned
- The original valve body, fittings, or outlets are damaged
Installation Notes
- Disconnect electrical power and shut off both water supplies
- Photograph all wire and outlet-hose locations before removal
- Transfer hoses and clamps one at a time to avoid incorrect routing
- Confirm that every connector is fully seated
- Open the water supplies slowly and inspect for leaks before reassembly
FAQ
Is this a Genuine GE OEM water valve?
No. It is an XPARTCO aftermarket OE-style replacement for compatible GE washers.
How many inlets and outlets does it have?
The assembly has two water inlets and three controlled outlets.
Can a failed valve cause continuous filling?
Yes. A valve that is stuck mechanically open can allow water to enter even when it is not energized.
Will it fit every GE front-load washer?
No. Verify the complete model number, original valve number, outlet layout, and electrical connectors before ordering.
Shop With Confidence
Verify the complete washer model and original valve number before ordering. Our compatibility team can help determine whether XPARTCO WH13X10029 is correct for your appliance.
