XPARTCO WH13X26637 Washer Water Valve
The XPARTCO WH13X26637 is an aftermarket replacement quad water inlet valve for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, RCA, Café, and Kenmore models. This valve controls the flow of water into the washer from the household supply line, using two internal valves — each with its own wire terminals — to manage water flow and temperature blending for the wash cycle. When the control calls for a fill, the corresponding solenoid opens to admit water and closes once the correct level is reached.
Rated 120V, 6/5W. Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve produces a clear set of symptoms: the washer not starting, an error code related to water fill, or — one of the most common complaints — water continuing to drip into the tub between cycles even when the washer isn't running, since a worn internal seal can fail to shut off completely. It directly replaces WH13X24058, 4546358, AP5999608, AP6282070, EAP11729480, EAP12171559, PS11729480, PS12171559, WH13X26637-25PK, AGE26282, and PD00037665.
Quick Answer
The XPARTCO WH13X26637 Washer Water Valve fixes GE top-load washers (and select Hotpoint, Haier, Monogram, RCA, Café, and Kenmore models) that won't start, show a water-fill error code, or have water dripping into the tub between cycles. Quad valve design — 2 valves, each with its own wire terminals. 120V, 6/5W. Replaces WH13X24058, 4546358, AP5999608, AP6282070, EAP11729480, EAP12171559, PS11729480, PS12171559, WH13X26637-25PK, AGE26282, PD00037665. Dripping into the tub between cycles, even with the washer off, is a classic sign of a worn valve seal that isn't shutting off completely.
Common Problems This Part Fixes
- Washer won't start
- Error code related to water fill displayed on the control panel
- Water dripping into the tub between cycles, even when the washer isn't running
- Washer filling slowly or only partially
- No hot water reaching the tub, or no cold water reaching the tub
- Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH13X26637, 4546358, AGE26282, AP6282070, EAP11729480, EAP12171559, PS11729480, PS12171559, WH13X24058, WH13X26637-25PK, PD00037665
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, RCA, Café, and Kenmore washers built on the GE platform, including model numbers such as:
- GTW680BSJ3WS, GTW680BSJ4WS, GTW680BSJ5WS, GTW680BSJ6WS
- GTW685BPL0DG, GTW750CPL1DG, GTW720BSN0WS
- PTW605BPR1DG, PTW605BSR0WS, PTW605BSR1WS
- PTW700BPT0DG, PTW700BST0RS, PTW700BST0WS
- PTW705BPT0DG, PTW705BST0RS, PTW705BST0WS
Note: This is a top-load washer valve, distinct from GE's front-load valves used on other GE washer platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
- Aftermarket replacement quad water inlet valve — two valves, each with its own wire terminals
- Resolves "won't start," "water fill error code," and "dripping into the tub between cycles" symptoms caused by valve failure
- Direct drop-in replacement — matches the original mounting and hose connections
- Rated 120V, 6/5W
- Replaces WH13X24058, 4546358, AP5999608, AP6282070, EAP11729480, EAP12171559, PS11729480, PS12171559, WH13X26637-25PK, AGE26282, and PD00037665
- Compatible with GE, Hotpoint, Haier, Monogram, RCA, Café, and Kenmore top-load washers
- Aftermarket replacement built to OEM-equivalent quality standards
- DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
| Part Number | XPWH13X26637 |
| OEM Part Number | WH13X26637 |
| Part Type | Washer Quad Water Inlet Valve |
| Condition | Aftermarket Replacement |
| Application | Top-Load Washers |
| Voltage | 120V |
| Wattage | 6/5 W |
| Valve Design | Quad — 2 valves, each with separate wire terminals |
| Repair Difficulty | Easy — 15 to 30 minutes |
| Quantity | 1 valve assembly |
| Compatible Brands | GE, Hotpoint, Haier, Monogram, RCA, Café, Kenmore |
Installation Notes
Frequently Asked Questions
Water keeps dripping into my washer tub even when it's not running. Is this the valve?
Yes, this is one of the most common symptoms of a failing valve, and a well-documented one for this exact part. If you've already checked the hoses and confirmed they're not the source of the leak, a worn internal seal in the valve is the most likely remaining cause — the seal fails to shut off completely, letting a small amount of water continue dripping through even between cycles. Shutting off the water supply is a temporary workaround, but replacing the valve is the permanent fix.
Why does this valve have two sets of wire terminals?
This is a quad valve design, meaning it houses two separate internal valves in one assembly, each with its own electrical connection. This allows the washer to independently control different water functions — such as hot and cold fill — from a single combined unit rather than requiring two completely separate valve housings.
Is this a top-load or front-load washer valve?
This is a top-load washer valve, compatible with GE's GTW and PTW model series. It's a different valve design from the ones used on GE's front-load washer platforms, so confirm your washer type and model number before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the quad valve design, wattage, and connection type of the original WH13X26637 valve used in compatible GE, Hotpoint, Haier, Monogram, RCA, Café, and Kenmore top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
